Clear User Pin Code


  • This feature returns the user code back the factory default setting of 0000. 
  • It does not reset any other mode or feature of the lock.
  • There is a 60 second programming time limit to each step. 
  • If you time out or make an error, programming will end and you will need to restart from step 1.


  1. We suggest reading through instructions prior to beginning programming
  2. Press and hold the Receiver Latch (On the inside latch mechanism) learn button until the yellow LED begins a three blink pattern
  3. Enter the Supervisor pin code (153249 as of 2/3/2025) and press the Unlock button
  4. Enter 8888 and press the Lock button
  5. If successful the green LED will flash twice on the Receiver (The outer keypad) Latch 
  6. Continue programming or enter 9999 followed by pressing the Lock button to exit Learn Mode
  7. Test lock function to make sure user default setting is restored. Lock can now be programmed with a new user code


https://compx.com/resources/is-600-stealthlock-instructions.pdf